Continuing my start-of-the-year clean-up project tradition (for last year's project see https://chaos.social/@foosel/111687404140972445).
Today I tackled the hallway shelf and the built-in closet. Filled up several garbage bags once more. Ouch, my back 😅
I also decided to throw out my first 3d printer that was still stored in the closet, as much as it saddens me. It's no longer working & it's taking up too much space for that. But I'll keep the front plate & Pi 😊
No before pictures for you bw - too embarrassing 😬
=> View attached media | View attached media | View attached media
=> More informations about this toot | More toots from foosel@chaos.social
Also, in case you are wondering about the two chairs...
Those are two out of the four chairs that belong to my dinner table. The other two are on one long side of the table, while the other lomg side is taken up by an office chair as that is the spot my partner uses when working from home office from my place.
The two chairs are easier to store in the hallway than the office chair, so this is the default 😅
=> More informations about this toot | More toots from foosel@chaos.social
The eye cooperated thanks to eye drops and so now the old Ultimaker is fully dismantled and everything I could no longer see any use for is in the bin or the box of electronics to get to recycling.
But I kept the front plate, Arduino Mega & shield, Pi1 & SD and the hobbed gear and have ordered a presentation frame that will fit all of that to be mounted in my office 😊
Layout will probably be something like the picture.
=> More informations about this toot | More toots from foosel@chaos.social
I've now mounted the front plate and electronics of my first 3d printer into a frame and given it a place of honour in my office. The printer with which everything OctoPrint started. The printer that literally changed my life.
I think that's a good way to keep it in memory without it taking up too much space.
=> More informations about this toot | More toots from foosel@chaos.social
@foosel Good job! Nice to see that you also have Limited Run boxes! I’ve got the Loom box and I’m still wasting for the „Sam & Max - Hit the Road“ release. 🥲
=> More informations about this toot | More toots from stdevel@chaos.social
@stdevel That was a gift by my partner that made me exttremely happy 😊 The box is actually empty now though, the contents are at better locations and I'm seriously considering throwing out the box even though I love its look, as it's quite a big box in a shape that doesn't easily lend itself to other uses either.
Will think about that for a while yet.
=> More informations about this toot | More toots from foosel@chaos.social
@foosel
May be for Plant Growing?
@stdevel
=> More informations about this toot | More toots from datavizzard@chaos.social
@foosel Good for you! I haven't been able to do the same to my cupcake CNC. I do owe a lot of my career to that 3d printer that no longer functions and takes of up so much space. I think may steal your idea of saving the front plate.
=> More informations about this toot | More toots from justinto@mas.to
@justinto Not gonna lie, it was really hard to "kill" it, but I'm feeling like a weight lifted off my shoulders. I've been thinking about this for years. It took up so much space (literally half of the biggest shelf in the built-in closet from the start of this thread) and hasn't been used in close to a decade now.
Sometimes we just need to let things go. And by keeping some parts that defined it, I get something to remember it with, with a way smaller footprint.
=> More informations about this toot | More toots from foosel@chaos.social
@foosel I love this! A fitting tribute to a magical machine
=> More informations about this toot | More toots from itsthejoker@fosstodon.org
@foosel that's a fitting tribute and send-off.
=> More informations about this toot | More toots from greenfox@mastodon.gamedev.place
@foosel This is so cool! 😍
What's the part left of the sd card?
=> More informations about this toot | More toots from fleaz@chaos.social
@fleaz The hobbed gear (or rather bolt) used in the extruder for gripping the filament and moving it forward. You don't see things like that anymore these days ^^
=> More informations about this toot | More toots from foosel@chaos.social
@foosel Sorry! 🙈😅
=> More informations about this toot | More toots from fleaz@chaos.social
@fleaz 😂
=> More informations about this toot | More toots from foosel@chaos.social
@foosel @fleaz I think there's a good reason we don't see them anymore 😅
=> More informations about this toot | More toots from nicoduck@chaos.social
@nicoduck @fleaz I would agree
=> More informations about this toot | More toots from foosel@chaos.social
@foosel Lovely.
=> More informations about this toot | More toots from oliviersaraja
@foosel so you made the 3d printer a little more 2d?
=> More informations about this toot | More toots from climbertobby@chaos.social
@climbertobby Yep, and ironically it's hung up above the paper printer ^^
=> More informations about this toot | More toots from foosel@chaos.social
@foosel I miss Ultimaker so much. They were fast. The kinematics were clever. They were very reliable. I still find Prusaslicer on the XL clunky compared to Cura on the UM3. I really wish Ultimaker kept the community focus like Prusa has.
I might do a shadowbox of mine like you have.
=> More informations about this toot | More toots from burdickjp@mastodon.social
@foosel that's really cool!
My first machine from 2012 is... Still printing. It really feels like it on its last legs though.
=> More informations about this toot | More toots from bracken@hachyderm.io
@bracken That Ultimaker was from 2012 as well. I retired it a few years ago though, it got increasingly difficult to get my hands on 2.85mm filament and playing with blue tape on a cold acrylic bed also got old fast 😅
=> More informations about this toot | More toots from foosel@chaos.social
@foosel I really do miss the laser cut wood 3D printers, Printrbot especially.
Even after years of printing, you could still get a whiff of that slightly burnt wood.
=> More informations about this toot | More toots from dutchbarracuda@mastodon.social
@dutchbarracuda When I dismantled that 12 year old printer, my hands smelled like I'd been in a smokehouse afterwards 😂
I still got a laser cut Printrbot Simple in the basement, including the box, all fully varnished with a cherry wood look. Not sure what to do with it tbh.
=> More informations about this toot | More toots from foosel@chaos.social
@foosel That looks great!
=> More informations about this toot | More toots from jim@lor.sh
@foosel :BlobhajHeart:
=> More informations about this toot | More toots from bison@mastodon.social
@foosel
I can not put in words how much I like that idea and how "fuzzy warm nostalgic mixed with intrinsic motivation" this makes me feel. Thank you for sharing.
=> More informations about this toot | More toots from blackcoffeerider@social.saarland
@foosel
A very good idea!
=> More informations about this toot | More toots from GustavinoBevilacqua@mastodon.cisti.org
@foosel I’m currently reviving my Mendel90 which I haven’t used for almost 12 years. Used OctoPrint for first movement tests. Have to update firmware and calibrate next
=> More informations about this toot | More toots from fschulze@mastodon.social
@foosel oh that is so nice, thanks for the idea ! Will do the same ! That could make a small gallery of past machines to display :D
=> More informations about this toot | More toots from EmmanuelG@framapiaf.org
@foosel It is beautiful! By the way, what printer(s) are you using at the moment?
=> More informations about this toot | More toots from M4x@chaos.social
@M4x A heavily modified early Prusa MK3 and recently I also added a QiDi Q1 Pro.
=> More informations about this toot | More toots from foosel@chaos.social
@foosel Thanks!
=> More informations about this toot | More toots from M4x@chaos.social
@foosel storing semi-/unstackable chairs in a crammed apartment: i am thinking about a contraption to hoist them horizontally under the ceiling.. (doing that with bikes is too easy...).
If s.o. knows a tutorial/howto/ProofOfConcept, hints welcome.
=> More informations about this toot | More toots from adorfer@chaos.social
@foosel Der Ehrenplatz für die „Monkey Island“-Box zeugt von deinem guten Geschmack! :)
Und ihr seid sehr gut mit Getränken ausgestattet. Ich wäre, wenn die Berliner Wasserkalypse doch noch gekommen wäre, ziemlich blöd dagestanden.
=> More informations about this toot | More toots from searchparty@mstdn.social
@foosel
How was Priority: Halagaz?
=> More informations about this toot | More toots from llanion@masto.ai
@llanion Can't say yet, haven't yet gotten around to try.
=> More informations about this toot | More toots from foosel@chaos.social
@foosel good ol' ultimaker 1. We dismantled ours @RaumZeitLabor a while ago too.
Sad but it's just not performing anymore
=> More informations about this toot | More toots from TabascoEye@chaos.social This content has been proxied by September (3851b).Proxy Information
text/gemini
