Ancestors

Toot

Written by amd on 2024-11-14 at 18:48

Perfect bed adhesion. No notes.

@3dprinting

[#]3dprinting #voron

=> View attached media

=> More informations about this toot | More toots from amd@amd.im

Descendants

Written by Koz Ross on 2024-11-14 at 20:07

@amd @3dprinting What material is that?

=> More informations about this toot | More toots from koz@chaos.social

Written by amd on 2024-11-14 at 20:47

@koz

Paramount ABS, peeled right off the semi satin sheet immediately, even at 110C

Giving it a good clean and going to re-try calibration stuff later.

I got 30mm3/s with no skips before canceling the print though.

=> More informations about this toot | More toots from amd@amd.im

Written by Koz Ross on 2024-11-14 at 21:19

@amd Paramount ABS is very flowy in my experience, so that tracks. I've not had these kinds of adhesion issues with it, but I've not used any satin-like sheets with it yet. Might be a time for the Dimafix.

=> More informations about this toot | More toots from koz@chaos.social