Ancestors

Written by Dr David Mills on 2025-01-24 at 19:53

Having a first look at @doc's radio.

It's totally dead. Drawing a shade under 0.05mA I assume that is keeping some clock running or something, but nothing else causes any more current to be drawn.

This should be an interesting repair.

=> View attached media

=> More informations about this toot | More toots from Dtl@mastodon.social

Written by Dr David Mills on 2025-01-25 at 09:43

I did a little bit more investigation on this radio last night, there's an internal DC-DC converter that turns 4.5V into 9V. That isn't working. I need to check if that's waiting for some enable signal.

Putting a switching converter in a radio is an interesting idea. I wonder how they filter the noise.

=> More informations about this toot | More toots from Dtl@mastodon.social

Written by Dr David Mills on 2025-01-26 at 18:51

Back at this radio. There's no significant voltage across the input to the DCDC converter. All there is before that is a pair of transistors a switch and a couple of switched jack sockets.

I've got the steady arm out for the camera as I've had a comment or two that my repair videos are a bit shaky. Fair enough.

=> View attached media

=> More informations about this toot | More toots from Dtl@mastodon.social

Written by Dr David Mills on 2025-01-26 at 20:06

I'm getting more convinced that this radio has an electromechanical issue, if I put pressure on the board I can increase the current consumption from 0.1mA to 1mA.

There are a couple of switched jack sockets that are in the area of the board I'm investigating. I'll give them a deoxit soak and see if that clears things up.

Still 2/3rds of sod all on the capacitors, so something is high resistance either way.

=> More informations about this toot | More toots from Dtl@mastodon.social

Written by Dr David Mills on 2025-01-27 at 20:45

Trying to get the PCB out of the radio. The service manual suggests it should just hinge up if you release two tabs, but I can't find the tabs.

=> View attached media

=> More informations about this toot | More toots from Dtl@mastodon.social

Written by WokStation on 2025-01-27 at 20:48

@Dtl are they hidden underneath?

=> More informations about this toot | More toots from wokstation@universeodon.com

Written by Dr David Mills on 2025-01-27 at 20:51

@wokstation I've looked, but I can't see them. If you try to lever up the board you can feel it is held down, but I can't see what by.

=> More informations about this toot | More toots from Dtl@mastodon.social

Written by WokStation on 2025-01-27 at 21:04

@Dtl got an endoscope? Or a raspberry pi camera?

=> More informations about this toot | More toots from wokstation@universeodon.com

Toot

Written by Dr David Mills on 2025-01-27 at 21:13

@wokstation somewhere

=> More informations about this toot | More toots from Dtl@mastodon.social

Descendants

Proxy Information
Original URL
gemini://mastogem.picasoft.net/thread/113902383576201504
Status Code
Success (20)
Meta
text/gemini
Capsule Response Time
404.955607 milliseconds
Gemini-to-HTML Time
1.891517 milliseconds

This content has been proxied by September (3851b).