Ancestors

Written by Gina Häußge on 2025-01-02 at 20:05

Continuing my start-of-the-year clean-up project tradition (for last year's project see https://chaos.social/@foosel/111687404140972445).

Today I tackled the hallway shelf and the built-in closet. Filled up several garbage bags once more. Ouch, my back 😅

I also decided to throw out my first 3d printer that was still stored in the closet, as much as it saddens me. It's no longer working & it's taking up too much space for that. But I'll keep the front plate & Pi 😊

No before pictures for you bw - too embarrassing 😬

=> View attached media | View attached media | View attached media

=> More informations about this toot | More toots from foosel@chaos.social

Written by Gina Häußge on 2025-01-02 at 20:13

Also, in case you are wondering about the two chairs...

Those are two out of the four chairs that belong to my dinner table. The other two are on one long side of the table, while the other lomg side is taken up by an office chair as that is the spot my partner uses when working from home office from my place.

The two chairs are easier to store in the hallway than the office chair, so this is the default 😅

=> More informations about this toot | More toots from foosel@chaos.social

Written by Gina Häußge on 2025-01-03 at 14:31

The eye cooperated thanks to eye drops and so now the old Ultimaker is fully dismantled and everything I could no longer see any use for is in the bin or the box of electronics to get to recycling.

• Sigh* End of an era 😕 The 3d printer that literally changed my life.

But I kept the front plate, Arduino Mega & shield, Pi1 & SD and the hobbed gear and have ordered a presentation frame that will fit all of that to be mounted in my office 😊

Layout will probably be something like the picture.

=> View attached media

=> More informations about this toot | More toots from foosel@chaos.social

Written by Gina Häußge on 2025-01-26 at 12:42

I've now mounted the front plate and electronics of my first 3d printer into a frame and given it a place of honour in my office. The printer with which everything OctoPrint started. The printer that literally changed my life.

I think that's a good way to keep it in memory without it taking up too much space.

=> View attached media

=> More informations about this toot | More toots from foosel@chaos.social

Written by fleaz on 2025-01-26 at 12:46

@foosel This is so cool! 😍

What's the part left of the sd card?

=> More informations about this toot | More toots from fleaz@chaos.social

Written by Gina Häußge on 2025-01-26 at 12:48

@fleaz The hobbed gear (or rather bolt) used in the extruder for gripping the filament and moving it forward. You don't see things like that anymore these days ^^

=> More informations about this toot | More toots from foosel@chaos.social

Toot

Written by Nico on 2025-01-26 at 13:57

@foosel @fleaz I think there's a good reason we don't see them anymore 😅

=> More informations about this toot | More toots from nicoduck@chaos.social

Descendants

Written by Gina Häußge on 2025-01-26 at 13:57

@nicoduck @fleaz I would agree

=> More informations about this toot | More toots from foosel@chaos.social