Ancestors

Toot

Written by Paul Fisher on 2025-01-07 at 17:07

A lot slimmer than my last one 😁

[#]ESPHome #HomeAssistant

(Cc @revk)

=> View attached media

=> More informations about this toot | More toots from psfshr@mastodon.me.uk

Descendants

Written by Paul Fisher on 2025-01-07 at 17:09

Just need to print a surround and a mount and it can go up on the wall in the kitchen 😌

=> More informations about this toot | More toots from psfshr@mastodon.me.uk

Written by Paul Fisher on 2025-01-07 at 20:54

Side on views if anyone is interested

=> View attached media | View attached media

=> More informations about this toot | More toots from psfshr@mastodon.me.uk

Written by Paul Fisher on 2025-01-07 at 20:56

I should note that none of this is me being clever. 99% of the effort was down to @revk for making and selling the boards.

I just plug stuff in 😉

=> More informations about this toot | More toots from psfshr@mastodon.me.uk

Written by Paul Fisher on 2025-01-08 at 15:06

With a front cover on, both with and without board LEDs running (the LEDs showing through were a happy accident!)

Next step, design and print a wall mount!

[#]ESPHome #HomeAssistant

=> View attached media | View attached media

=> More informations about this toot | More toots from psfshr@mastodon.me.uk

Written by Paul Fisher on 2025-01-09 at 18:20

Wall mounted… #ESPHome #HomeAssistant

=> View attached media | View attached media

=> More informations about this toot | More toots from psfshr@mastodon.me.uk