Tied a #meshtastic node on a six meter pole in the garden ...
This is a XIAO ESP32-S3 node with a gizont antenna
But it works far worse than the same antenna on an heltec v3 in the attic (5.5km vs 100m)
Need to take the node down and investigate. My guess is that the antena is disconnected. Could also be a tuning issue so I'll probably use an heltec next time since it works
For now the node stays there to see how it lasts with solar panel, and if it resists the wind (15knots tomorow,then 30)
=> More informations about this toot | More toots from fdlamotte
the pole resisted 40knots gusts and the node is still up
I've not modified the xiao to read the bat level, but I think it is ok ... i'll read the bat voltage when the node is down
=> More informations about this toot | More toots from fdlamotte
text/gemini
This content has been proxied by September (ba2dc).