Some drivers prefer dedicated satellite-navigation devices over mobile phone ‘apps’ because the dedicated devices are less likely to fall off the dashboard during braking. But you can’t just buy the cheapest device and expect to succeed in updating it.
I think most people who search for “SatNav that works with Linux” or similar really mean “SatNav that does not require me to buy a new Microsoft Windows computer to update it” and might not have considered units that can be updated “without any computer”. For these you will usually require a Wi-Fi base station—or a computer configured to act as one—but won’t need to run the manufacturer’s own software on it.
However, two further things are of note:
Immediately after logging in to the Wi-Fi hot-spot and entering the credentials for a newly-created “TomTom account”, the device said “we are having trouble accessing TomTom services”, which turned out to be because the firmware had somehow got itself into a state that treated the Wi-Fi access point as “out of range” (even when placed just centimetres from the router). This could be worked around via power off (not sleep) and on again, but then the disconnected state repeated itself during the update. Thankfully, in our case, the update process did continue from where it left off after a second power-cycle: it hadn’t left the system in an unbootable inconsistent state.
The update process of course drove the ADSL to its maximum capacity and thereby increased the probability of other traffic being dropped, but it is possible to tell the device to send its traffic through a proxy, which can limit the rate if desired.
We also found that, if you have a mobile phone capable of acting as a Wi-Fi ‘hotspot’, and a data plan that permits it, you can have the Basic obtain realtime traffic updates via the mobile hotspot, which might be more convenient than sending them over Bluetooth from the proprietary phone ‘app’. (Traffic updates are not compulsory; the device can work entirely offline with only a GPS/GLONASS signal.)
In 2022 our TomTom Go Basic got stuck in a continuous loop of “not enough space” messages when trying to update. When we power-cycled the device and went to Menu / Maps / Delete maps, it went back to an “updating” screen (at 98%), then said we couldn’t delete the only map, then allowed us to repeat the updates.
Obviously these notes are posted in the hope that they are useful but without any warranty, so if you brick your navigation device and arrive late for a million-dollar deal or something then don’t sue me.
The Basic device has a “speeding alert” facility but it’s off by default. If turning it on, note that:
It might be better not to enable these alerts if there is any danger of their giving the driver a “false sense of security”—drivers should know to check the signage themselves.
A related concern is it’s too easy to turn off sound on this device. The ‘menu’ button appears at the bottom left of the map screen, and, once pressed, is replaced by a ‘mute’ button—making ‘mute’ rather too easy to activate by mistake and without noticing.
All material © Silas S. Brown unless otherwise stated. Bluetooth is a registered trademark held by the Bluetooth Special Interest Group. DriveSmart is a trademark of Garmin Ltd. or its subsidiaries. Garmin is a trademark of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries. MapShare is a trademark of Garmin Ltd. or its subsidiaries and also a trademark and brand of TomTom International B.V. (does it depend on the font?) Microsoft is a registered trademark of Microsoft Corp. TomTom is a trademark of TomTom International BV. Wi-Fi is a trademark of the Wi-Fi Alliance. Windows is a registered trademark of Microsoft Corp. Any other trademarks I mentioned without realising are trademarks of their respective holders.
text/gemini;
This content has been proxied by September (3851b).