Ancestors

Toot

Written by Robert Price on 2025-01-30 at 20:44

I have been playing with creating my own serial card for the #RC2014.

I wanted one with tight address decoding so I could run several on my RC2014 Classic 2. I also added a jumper for the CTS line so I could enable that for devices that support it.

As there was spare space, I also added clock and RX/TX LEDs like the Tynemouth Serial card.

The INT, CLK, RX, and TX lines are jumpered so can be connected to the bus if used as the primary serial card.

=> View attached media

=> More informations about this toot | More toots from robertprice@mastodonapp.uk

Descendants