Ancestors

Toot

Written by nixCraft 🐧 on 2025-01-22 at 19:04

1. Open a Linux terminal.

2. Type the following command:

watch -d -n 1 sensors

3. This command displays CPU, GPU, Wi-Fi, NVMe SSD, and HDD temperature data in real time. The -d option highlights the differences between updates, and the -n 1 option sets the interval to 1 second, running the sensors command every second. See https://www.cyberciti.biz/faq/howto-linux-get-sensors-information/ for more info.

[#]Linux #opensource

=> View attached media

=> More informations about this toot | More toots from nixCraft@mastodon.social

Descendants

Written by Nono on 2025-01-22 at 19:22

@nixCraft

Didn't knew about -d option. Game changer, especially when combined with iptables/firewall monitoring! Thanks.

=> More informations about this toot | More toots from Nono@framapiaf.org

Written by Ertain on 2025-01-22 at 19:38

@nixCraft Thanks for sharing.

=> More informations about this toot | More toots from Ertain@mast.linuxgamecast.com

Written by Nick Radcliffe on 2025-01-22 at 20:01

@nixCraft Those highs look bad.

=> More informations about this toot | More toots from njr@mathstodon.xyz

Written by Mike Taylor 🦕 on 2025-01-22 at 21:14

@nixCraft Is there a MacOS equivalent?

=> More informations about this toot | More toots from mike@sauropods.win

Written by rtn on 2025-01-22 at 21:30

@nixCraft Ah I didn't know about -d. Nice!

=> More informations about this toot | More toots from rtn@chaos.social

Written by draeath on 2025-01-22 at 22:32

@nixCraft this is all assuming sensors has been set up correctly and reports sane data for your hardware.

Mine has lots of thermal values at absolute zero, for instance.

=> More informations about this toot | More toots from draeath@infosec.exchange