Ancestors

Toot

Written by ikidd@lemmy.world on 2025-01-06 at 17:15

Is there a way to turn off the hot corners between monitors?

https://lemmy.world/post/23955013

=> More informations about this toot | More toots from ikidd@lemmy.world

Descendants

Written by burgersc12 on 2025-01-06 at 17:29

Yeah, I think it’s under Screen Edges

=> More informations about this toot | More toots from burgersc12@mander.xyz

Written by ikidd@lemmy.world on 2025-01-06 at 17:43

So I got messing around in there, and I found that if I set Corner Barrier to False, and Edge Barrier to 0 pixels, it seems to have taken it away, but just doing either of them by themselves did nothing, which is what I had tried.

I’m not even quite sure what either of those are, or if they’re supposed to be independent, but they don’t act that way. Hot corners in the far left and right of the monitor group still works, which is fine, even though I personally turn them off.

=> More informations about this toot | More toots from ikidd@lemmy.world

Written by schnurrito@discuss.tchncs.de on 2025-01-06 at 17:50

seems to be the default behavior on my machine (or I changed it and forgot about it)

I am attaching a screenshot of my settings; the hot corner only seems to get activated at the top left of my leftmost screen, not on the others.

=> More informations about this toot | More toots from schnurrito@discuss.tchncs.de

Written by ikidd@lemmy.world on 2025-01-06 at 18:23

If you put your mouse tight to the edge and drag less than quickly, does it still snag? I found unless I deactivated the corner check box as well, it did.

=> More informations about this toot | More toots from ikidd@lemmy.world

Written by schnurrito@discuss.tchncs.de on 2025-01-06 at 18:29

Are you talking about hot corners (activating a feature when moving one’s mouse to the screen) or about window snapping (dragging a window to the corner)? Window snapping still works on all monitors with these settings.

=> More informations about this toot | More toots from schnurrito@discuss.tchncs.de

Written by ikidd@lemmy.world on 2025-01-06 at 19:41

Just the ones between monitors. If you drag from an inside monitor to the next, if you’re tight or close to tight to the upper or lower edge, I find that it “snags” trying to activate a hot corner or use it for snapping windows. I found out I have to disable both Corner Barrier and set Edge Barrier to 0 in order to get it to stop that, just doing one or the other didn’t help. You have your Edge Barrier set to None but Corner still on, and if I do that it still snags.

=> More informations about this toot | More toots from ikidd@lemmy.world