Ancestors

Written by Guy Dupont on 2025-01-04 at 21:00

Wrote a script to generate these "Iso Slice-O" drawings directly from 3D model files (with a tiiiny bit of manual SVG cleanup at the end). Ran it on some of the most popular models and I'm obsessed with the results using white ink / black paper

=> View attached media | View attached media | View attached media

=> More informations about this toot | More toots from gvy_dvpont@mastodon.social

Written by Guy Dupont on 2025-01-04 at 21:01

First step takes in a number of slices and runs through the STL file vertically to get cross sections, and produces an SVG for each. Here's the output:

=> View attached media

=> More informations about this toot | More toots from gvy_dvpont@mastodon.social

Written by izumitelj on 2025-01-04 at 23:00

@gvy_dvpont

This looks great 👌🤓. Did you plan to release script to the public at some point? It could be useful for laser cutting too.

=> More informations about this toot | More toots from izumitelj@mastodon.social

Toot

Written by Guy Dupont on 2025-01-04 at 23:29

@izumitelj I do plan on releasing the script but I actually think this is mostly overkill for lasering BUT I did discover Kiri:moto which runs in the browser and has a laser mode for exactly that purpose!

https://grid.space/kiri/

=> More informations about this toot | More toots from gvy_dvpont@mastodon.social

Descendants

Written by izumitelj on 2025-01-04 at 23:37

@gvy_dvpont great thanks! Didn't know about Kiri:Moto but I will give it a try. I will also watch for your script since I lake the openscad + occasionally work with graphics.

=> More informations about this toot | More toots from izumitelj@mastodon.social