Any feedback on the Palm Nano Paddle and Pico Paddle ?
I can buy one (not clear which model).
All I know is that these paddles are not manufactured anymore since at least 10 years.
(For portable operation, indeed.)
[#]CW #Morse #Morsecode
=> More informations about this toot | More toots from F4JWJ@mastodon.radio
@F4JWJ I have both the Mini and the Pico. From a handling point of view there is not much difference to me but I somehow use the Pico more on XOTA activations than the Mini. Hannes, DL9SCO owns the design rights and still produces them in small batches and sometimes fancy colors. Just contact him via email and he’ll tell you if new ones or spare parts are currently available.
=> More informations about this toot | More toots from DK3IP@social.darc.de
@DK3IP
Thanks for the info, I didn't know there is still a (small) production.
In fact, as I said, I've found one for sale.
The nice thing is that it comes with a fully loaded KX3...(😆).
My question was from the user point of view.
Wat is your feeling with these paddles : solid build or flimsy, precise or wobbling, rebounds, whatever ?...
=> More informations about this toot | More toots from F4JWJ@mastodon.radio
@F4JWJ The Pico is a bit more solid from the feel of the paddles than the Mini but with the Mini you can adjust the softness of the touch. Both are not as direct as the BaMaKey TP-III but are better in rain or high humidity since the contacts are more or less covered by the housing. The cable of the Mini has a strange connector on the key side that wasn‘t too sturdy and broke after 7 years. You can attach a small keyer (Code Cube) directly to the back of the Mini.
=> More informations about this toot | More toots from DK3IP@social.darc.de
@DK3IP thanks.
The BaMaKey TP-III is rather expensive (161€ + shipping), but seems top notch !
And I love the look.
=> More informations about this toot | More toots from F4JWJ@mastodon.radio
@DK3IP
In fact, this is a Pico Paddle with a 3.5mm jack + a support that screws into the KX3 + a 4 pins plug for the KX3.
I just agreed with the seller to add it to the KX3.
Looks like I will not use the Elecraft microphone that much ! 🤣
=> More informations about this toot | More toots from F4JWJ@mastodon.radio
@F4JWJ my MH3 didn’t see much light out of its box, never made a contact with it.
@DK3IP
=> More informations about this toot | More toots from IU1KGS@mastodon.radio
@IU1KGS @DK3IP
MH3 ?
=> More informations about this toot | More toots from F4JWJ@mastodon.radio
@F4JWJ the Elecraft (not so) cheapo microphone
@DK3IP
=> More informations about this toot | More toots from IU1KGS@mastodon.radio
@IU1KGS @DK3IP
👍
=> More informations about this toot | More toots from F4JWJ@mastodon.radio This content has been proxied by September (3851b).Proxy Information
text/gemini