Ancestors

Written by WeAreAllOne on 2024-12-05 at 13:21

Can't access containers remotely

https://lemm.ee/post/49067507

=> More informations about this toot | More toots from WeAreAllOne@lemm.ee

Written by just_another_person@lemmy.world on 2024-12-05 at 14:09

Wireguard only gets you to the endpoint. You need extra routes from there.

Post your wg config, and possibly the staticnroute table on the router.

=> More informations about this toot | More toots from just_another_person@lemmy.world

Toot

Written by WeAreAllOne on 2024-12-05 at 15:47

Ah makes sense. I’m using a Mikrotik router and implemented the Back to Home function which automatically creates the tunnel and all firewall configs. Supposedly it’s like me being in my home network but I need to look into your suggestions.

=> More informations about this toot | More toots from WeAreAllOne@lemm.ee

Descendants

Written by just_another_person@lemmy.world on 2024-12-05 at 16:01

That may look fine from your router’s perspective, but if your network clients don’t get an updated routing tables, they won’t know or possibly accept traffic from the new subnet on the VPN.

=> More informations about this toot | More toots from just_another_person@lemmy.world

Written by WeAreAllOne on 2024-12-05 at 19:35

Solved. All I needed to do was route the Back to Home (wire guard ) address list to a table for the server. 🤙

=> More informations about this toot | More toots from WeAreAllOne@lemm.ee