Ancestors

Written by Hiro Lynx 🐾♫🐧 on 2024-12-02 at 15:33

Trying to assemble the cheap CNC router!

https://www.picarto.tv/HiroLynx

With @Kooda and @morkheleb

Update: the stream has ended, I'll post a timelapse later!

=> More informations about this toot | More toots from Hiro@loutre.info

Toot

Written by Hiro Lynx 🐾♫🐧 on 2024-12-02 at 19:10

@Kooda @morkheleb small test with an example file and the laser module !

=> View attached media

=> More informations about this toot | More toots from Hiro@loutre.info

Descendants

Written by Dragonhead on 2024-12-02 at 19:14

@Hiro @Kooda @morkheleb :D She burns! So precise!

=> More informations about this toot | More toots from Dragonhead@mastodon.social

Written by Kefen on 2024-12-03 at 08:31

@Hiro @Kooda @morkheleb That's impressive. How many modules like that do you have? :)

=> More informations about this toot | More toots from kefen@mastodon.social

Written by Hiro Lynx 🐾♫🐧 on 2024-12-03 at 10:13

@kefen @Kooda @morkheleb I just have the milling module and the laser module. Both smol and not very powerful, but way enough for the primary usage I planned to have, which is making PCBs by milling the circuits and holes on one side and engraving the silkscreen layer on the other side.

I saw that one could also use the laser to etch a layer of paint on the copper side to reveal copper to then be etched chemically, but I wanted a chemical-free process.

=> More informations about this toot | More toots from Hiro@loutre.info

Written by Kefen on 2024-12-03 at 10:16

@Hiro @Kooda @morkheleb

=> View attached media

=> More informations about this toot | More toots from kefen@mastodon.social