Ancestors

Written by Anton Piatek on 2024-11-20 at 12:32

Anyone using @octoprint with a prusa mk4 and mmu?

Ive not tried it yet as the builtin WiFi is pretty good, octoprint is just so much more powerful and feature capable in general

=> More informations about this toot | More toots from sldrant@mastodon.social

Written by 🇳🇱 🇪🇺Jeroen 🇺🇦 🇺🇦 on 2024-11-20 at 18:46

@sldrant @octoprint not exactly, but I am using octoprint with a mk2.5s and an mmu2s. Works like a charm.

=> More informations about this toot | More toots from jeroen@500.social

Written by Anton Piatek on 2024-11-20 at 19:09

@jeroen @octoprint @dekkia

Can you override the mmu reel used when starting a print? I often have single colour prints I start and currently have to select which slot to use on the printer. Would love to be able to do that on a remote print start

=> More informations about this toot | More toots from sldrant@mastodon.social

Toot

Written by Dekkia on 2024-11-20 at 19:32

@sldrant @jeroen @octoprint

When I do single-color prints I select the color I want in the Slicer.

I'm not aware of an option in Octoprint that allows you to select the filament post-slicing.

=> More informations about this toot | More toots from dekkia@dekkia.com

Descendants

Written by Anton Piatek on 2024-11-20 at 19:39

@dekkia @jeroen @octoprint OK, thanks that's what I thought I'd have to do. Either reslice or swap the mmu slots.

The mk4 let's me on the screen swap the filaments (or set two spools to be used when one runs out)

=> More informations about this toot | More toots from sldrant@mastodon.social

Written by 🇳🇱 🇪🇺Jeroen 🇺🇦 🇺🇦 on 2024-11-20 at 20:40

@sldrant @dekkia @octoprint if you use octoprint to start a print sliced with a single color profile you still get the option to select which spool to use on the printer’s display. Selecting this in octoprint might be possible, but it would require detecting the specific gcode that triggers the selection dialog and replacing it with other gcode that indicates a specific spool. There might be a plug-in for that, I don’t know.

=> More informations about this toot | More toots from jeroen@500.social

Written by 🇳🇱 🇪🇺Jeroen 🇺🇦 🇺🇦 on 2024-11-21 at 12:58

@sldrant @dekkia @octoprint Just did a quick search, and there is, indeed, a plugin for that: https://plugins.octoprint.org/plugins/prusammu/

=> More informations about this toot | More toots from jeroen@500.social

Written by Anton Piatek on 2024-11-21 at 13:18

@jeroen @dekkia @octoprint oh thanks! Must have missed that when I got the mk4

=> More informations about this toot | More toots from sldrant@mastodon.social