Ancestors

Written by a pale slim ghost on 2024-11-01 at 13:56

prototyping something 👀

=> View attached media

=> More informations about this toot | More toots from apaleslimghost@cathode.church

Toot

Written by a pale slim ghost on 2024-11-01 at 16:12

👀👀

=> View attached media

=> More informations about this toot | More toots from apaleslimghost@cathode.church

Descendants

Written by fuzzySynths on 2024-11-02 at 02:03

@apaleslimghost that looks really good. how did you cut the slots?

=> More informations about this toot | More toots from fuzzySynths@mas.to

Written by a pale slim ghost on 2024-11-02 at 08:31

@fuzzySynths drilled two holes at each end, then dremel cutting wheel and a file

=> More informations about this toot | More toots from apaleslimghost@cathode.church

Written by fuzzySynths on 2024-11-02 at 10:54

@apaleslimghost thanks, looks very neat. I'm adding new channels to my mixer, will try this when the time comes.

=> More informations about this toot | More toots from fuzzySynths@mas.to

Written by a pale slim ghost on 2024-11-02 at 12:28

@fuzzySynths that’s very much adjacent to what this project is! it’s a midi controller specifically for the Expert Sleepers ES-9 to turn it into a performance mixer

=> More informations about this toot | More toots from apaleslimghost@cathode.church

Written by fuzzySynths on 2024-11-02 at 14:43

@apaleslimghost I like the perfboard front - is it sized to fit eurorack?

=> More informations about this toot | More toots from fuzzySynths@mas.to

Written by a pale slim ghost on 2024-11-02 at 19:16

@fuzzySynths yeah! the ends snap off so you can use a stack of them for the whole module. they're from https://ottosdiy.com/, they do a variety of sizes. my first time using these, tbh i hate perfboard prototyping but i've been having fun doing this

=> More informations about this toot | More toots from apaleslimghost@cathode.church