Ancestors

Toot

Written by gafu on 2024-03-15 at 11:28

One thing i have build one year ago bring more joy and satisfaction to me than i expected.

I had seen something similar on the internet.

So evertime i'm in the need for a toilet brush, i grip my two-speed electrical one and do what have to be done with ease and got this nice water whirl.

Eleven out of 10 points! Everyone should have one of these.

[#]diy #electric #toilet

=> View attached media

=> More informations about this toot | More toots from gafu@techhub.social

Descendants

Written by ~n on 2024-03-15 at 11:31

@gafu It even comes with a built-in „northern hemisphere/southern hemisphere“ switch!

=> More informations about this toot | More toots from nblr@chaos.social

Written by gafu on 2024-03-15 at 11:36

@nblr

I made a custom 3D printed holder to have it at hand if needed.

So the brush will get no damage from the weight of the battery drill.

=> View attached media

=> More informations about this toot | More toots from gafu@techhub.social

Written by ~n on 2024-03-15 at 11:38

@gafu Nice one! how did you adapt the larger brush to the smaller drill chuck?

=> More informations about this toot | More toots from nblr@chaos.social

Written by gafu on 2024-03-15 at 11:43

@nblr

there is a parametric self-centering coupler on thingiverse, programmed with openscad.

https://github.com/blole/parametric-tapered-thread

i changed the parameter to make it working for 12mm toilet brush to 10mm aluminium rod coupler.

3d-printed in PETG.

Saved me time and money, otherwise needed to do metal lathe parts.

Problem was slipping between coupler and aluminium rod, i got it fixed with one layer of electrical tape on the rod.

=> More informations about this toot | More toots from gafu@techhub.social