Toots for vimja@tooting.ch account

Written by Niklaus 'vimja' Hofer on 2025-01-27 at 20:27

Nächst Wuche Basiskurs Houzärnti. Hüt no der Räst vom Equipment ga choufe.

=> View attached media

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2025-01-21 at 22:41

Anyone got any ideas what's wrong with my benchy? Printed that on a second hand #ratrig v-core 3.1.

[#]3dprinting #askfedi #3dprinter #klipper #voron

=> View attached media | View attached media | View attached media

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2025-01-14 at 22:31

Tonight at the @jacqueline , we assembled two #RatRig work benches. Need to add table tops and feet, then they are going to hold our two EatRig 3D printers (V-Core 3.1 500 and V-Core 4 idex).

=> View attached media | View attached media

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2025-01-04 at 10:55

Running that piece of open source software on my open hardware laptop to update the open source firmware on my open hardware media player!

[#]OpenSource #openhardware #opensourcefirmware #MNT #tangara

=> View attached media | View attached media

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2024-12-30 at 22:09

People in here sure did not get that one m(

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2024-12-30 at 22:09

Uuuuuuh. Someone is playing #demoscene music in the #38C3 lounge 🎇

AMIGAAAAA!

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2024-12-29 at 03:57

We found @mntmn on @foxitalic 's utopia Wimmelbild! #38c3

=> View attached media

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2024-12-27 at 18:38

Das Essensangebot für #Zöliakie betroffene am #38c3 ist leider nicht sehr gut.

Das Einzige, was ich bisher finden konnte ist veganes Gulasch und ein Hotdog ohne Brot.

Angeschrieben ist in es in der Regel auch nicht :(

Hat noch wer nen Tipp?

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2024-12-27 at 14:14

Aaaand just backed the @mntmn reform next crowdfunding on @crowdsupply !

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2024-12-27 at 10:47

@dcz

I'm the one who asked about the Stanford University Frankencamera (fcam) project after your great talk at 38c3.

Link here: https://graphics.stanford.edu/papers/fcam/

It's pretty old now, but afaik, they were very early, if not the first, to do many of the computational photography stuff which now the norm in proprietary camera implementations.

They went to port the thing to the Nokia N900 which also was a Linux phone (no Android!). That's why I thought it sounds similar / related to what you're doing...

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2024-12-27 at 09:32

@CyReVolt hast du kein DECT?

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2024-12-26 at 20:17

Keiner da bei der @digiges am #38c3

=> View attached media

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2024-12-26 at 15:22

My DECT at #38c3: 3506

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2024-12-24 at 14:42

Hür gits wiisi Wiehnachte :) 🌨️

=> View attached media

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2024-12-23 at 08:51

I'm pretty sure it's not the SD card, because:

• It's a reputable brand

• I got it from a reputable source

• It works well on all my PCs

• I used multiple runs of rsync --checksum to load my music

• I used f3 to verify the capacity, speed and integrity of the card and it's all as expected...

[2/4]

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2024-12-23 at 07:46

Dear #tangara community, I have a question.

I got myself a new SD card to hold all my music. A 512GB Samsung Pro Plus.

But my rangara does not like it at all. It's not working :( Meanwhile, two other SD cards I tested both work fine.

[1/4]

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2024-12-15 at 22:26

@jacqueline I have a question that's been with me for a while...

The tangara packaging contains this bit of card board that has been cut and folded to form a sort of cradle to hold the tangara in.

It's pretty nifty. Out in the wild, I have seen packaging that is even more complex, all cut out of a single sheet.

How are these made? Is there specialized software to work this out? Or a special kind of packaging engineer with amazing folding skills? :D

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2024-12-12 at 17:08

Got my #tangara ! @jacqueline

=> View attached media | View attached media | View attached media

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2024-12-10 at 21:44

Uuuuuuuuh. I just got notified by DHL about a package from @crowdsupply. That'll be the #tangara. Supposed to arrive on Friday!

@jacqueline

=> More informations about this toot | View the thread

Written by Niklaus 'vimja' Hofer on 2024-12-05 at 07:18

Back at #Cern for #Cephalocon.

=> View attached media

=> More informations about this toot | View the thread

=> This profile with reblog | Go to vimja@tooting.ch account