Toots for debauer@troet.cafe account

Written by debauer on 2025-01-30 at 09:42

How do you monitor multiple 3D Printers? I have Bambu and Klipper based printers. I want generell metrics but more important a stable camera feed.

[#]3dprinter #BambuLab #klipper

=> More informations about this toot | View the thread

Written by debauer on 2025-01-23 at 18:50

Before and after hot plate soldering.

[#]electronics #pcbdesign

=> View attached media | View attached media

=> More informations about this toot | View the thread

Written by debauer on 2025-01-23 at 18:05

First try and good enough. I used the python script behind solder-stencil.me, modified it to work with python3.13 and opened a MR.

[#]python #electronics #soldering #pcbdesign

=> View attached media

=> More informations about this toot | View the thread

Written by debauer on 2025-01-23 at 13:58

My first batch of PCBs from jlcpcb looking great. Now i'm waiting for a package from reichelt to solder the smd parts. My idea with the addon board turn out great. #electronics #diy #caravan #camper

=> View attached media | View attached media

=> More informations about this toot | View the thread

Written by debauer on 2025-01-11 at 01:15

Oida. Vllt. hat die Volksbank es jetzt geschafft meine Faulheit zu besiegen und verlieren mich als Kunden. Mit der neuen Karte die kein maestro mehr kann, funktioniert auch mein TAN Geraet nicht mehr. Jetzt 10 Tage warten bis die mirn QR Code per Post geschickt haben fuer SecureGo plus 🙃

=> More informations about this toot | View the thread

Written by debauer on 2025-01-10 at 00:45

Mein Pakistan YT Premium wurde gekickt und holy fuckballs wie viel Werbung ist das denn?

=> More informations about this toot | View the thread

Written by debauer on 2025-01-07 at 22:03

I jump started in the idea to generate a case for my PCBs with openscad. I under estimated the effort... i rather take my generated IDF files of just the board and do it the "old" way with PTC Creo. To get rid of Creo i tried out FreeCAD but this was also very frustrating. The concepts are similar, but way more complicatet implemented.

[#]cad #electronics #3dprint

=> More informations about this toot | View the thread

Written by debauer on 2025-01-07 at 17:19

Wie lange noch Congressseuche? #38C3

=> More informations about this toot | View the thread

Written by debauer on 2025-01-06 at 00:14

sweet, found a Zilog z86E08 inside a Turck EX signal bridge. It's used to get a digital signal from an area/room where could be an explosion if the circuits produces a spark. For example in a natural gas transfer point. sadly the zilog is one time programmable.

=> View attached media

=> More informations about this toot | View the thread

Written by debauer on 2025-01-05 at 23:04

Awesome resource of DIE shots (photo of the silicon in various ICs/Chips)

https://www.richis-lab.de/logic15.htm

[#]electronics #electronics #retrocomputing

=> More informations about this toot | View the thread

Written by debauer on 2025-01-05 at 21:13

Okey, there it is, my new year resolution. Now that i'm back in the electronic development and getting some good drugs :-D i target my prograstinated deep dive into linux with yocto and self developed (arm) hardware that can also run yocto.

[#]linux #yocto #pcb

=> More informations about this toot | View the thread

Written by debauer on 2025-01-04 at 12:26

VIAs versetzen weil Silkscreen sonst doof aussieht zustand.

=> More informations about this toot | View the thread

Written by debauer on 2025-01-04 at 11:56

Hello fellow hackers, i more or less inherated the stock of a electronic company. It's more or less stuff from the 90s and 00s. If you need ICs like, eproms (thousands! 27c series), a bunchload of flash, optocoppler, 74er and 40er logic, all sort of drivers, mcu (h8, zilog, pic), cplds... Feel free to ask, it's for free (for shipping) and the more the better :-) i will make a post on my page for more details - this will took some time, i'm ill right now. On the Picture you see around 20% #38c3

=> View attached media

=> More informations about this toot | View the thread

Written by debauer on 2025-01-04 at 11:01

5 Platinen a 10x10cm bei jlcpcb fuer 4 Dollar inkl Shipping und Steuer?! Ich werd nimmer 🙃 @Exilsarahl

=> View attached media

=> More informations about this toot | View the thread

Written by debauer on 2025-01-04 at 00:08

Noch 5 Addons nachgeschoben 🙃 morgen noch rule check und wieder raus finden wie ich damals Nutzen gebaut hab. Beeindruckend das der Preis für PCBs um 60% gefallen ist. Haun die Versandkosten aus China sicher noch mehr ein 🙈

=> More informations about this toot | View the thread

Written by debauer on 2025-01-03 at 21:03

Fast fertig. Das frisst doch mal eben nen ganzen Tag 🙃 Fehlen nur noch ein paar nice to have features wie Reset Button, Messpunkte und nen Stecker fuer CAN Bus muss ich noch raussuchen.

=> View attached media

=> More informations about this toot | View the thread

Written by debauer on 2025-01-03 at 17:10

Rinse and repeat.

=> View attached media

=> More informations about this toot | View the thread

Written by debauer on 2024-12-31 at 12:10

@vegan ich hab bei eurem assembly dieses Shirt gesehen und frage mich ob es das irgendwo zu bestellen gibt? #38C3

=> View attached media

=> More informations about this toot | View the thread

=> This profile with reblog | Go to debauer@troet.cafe account