Tux Machines
Posted by Roy Schestowitz on Aug 01, 2023
=> Android Leftovers | KDE Discuss Notifications and Mailing List
=> ↺ Adding a turbo readout to a vintage PC case
The hardware for this project includes an Arduino Mega 2560 board and a small OLED screen. Woehlke chose the Mega because he had it on hand, but any Arduino board would have worked. The Arduino receives power from one of the power supply’s 5V rails. And like the real turbo readouts of the ’90s, the Arduino doesn’t measure clock speed at all. It just looks at the LED above the turbo button to see if it is active, then uses that state to determine which number to display on the OLED. For extra flair, Woehlke added a starfield “screensaver” that appears on the OLED 10 seconds after pushing the turbo button.
=> ↺ Deckility handheld PC | #MagPiMonday
Recently, after considering getting his hands on Clockwork’s uConsole, a modular pocket-sized computer, he felt that building his own handheld was more challenging. Snapping up a Raspberry Pi Compute Module 4 (CM4), he also vowed to take advantage of its quad-core ARM Cortex-A72 processor by putting it at the heart of his own homemade device.
=> ↺ Forlinx announces RISC-V SoM based on StarFive JH7110
Forlinx announced in July that they are working together with the RISC-V processor manufacturer StarFive to deliver the FET7110-C System-on-Chip based specifically on the Jinghong 7110 with RISC-V architecture. The SoM is expected to target applications in commercial, medical, industrial automation, etc.
=> ↺ Boardcon introduces RK3566 embedded solution
The Boardcon is a Single Board Computer based on the Rockchip RK3566 and optimized for AI and Industrial applications. The SBC includes multiple peripherals including a Gigabit Ethernet port, multiple display ports and dual camera interfaces.
=> ↺ A Usable Arduino Debugging Tool
For as popular as the Arduino platform is, it’s not without its problems. Among those is the fact that most practical debugging is often done by placing various print statements throughout the code and watching for them in the serial monitor. There’s not really a great way of placing breakpoints or stepping through code, either. But this project, known as eye2see, hopes to change that by using the i2c bus found in most Arduinos to provide a more robust set of debugging tools.
=> gemini.tuxmachines.org This content has been proxied by September (3851b).Proxy Information
text/gemini;lang=en-GB