[2022-01-23T00:23:52Z] gemini://miguelmurca.flounder.online/gemlog/2022-01-22.gmi

[2022-01-23T00:30:52Z] Installing a python module from source code does make the module listed under pip list.. Could anything get borked if it was uninstalled from pip instead of kiss?

[2022-01-23T00:32:10Z] I mean, obviously nothing happens.. but..

[2022-01-23T01:46:44Z] Hello

[2022-01-23T01:52:38Z] I have an error on boot. "starting version 250.3-1-arch" "fsck:error 2 (no such file or directory) while executing fsck.ext4 for /dev/sda3" "ERROR: fsck failed on '/dev/sda3'" "mount: /new_root: unknown filesystem type 'ext4'." "You are now being dropped into an emergency shell." "sh: can't access tty; job control turned off"

[2022-01-23T01:53:04Z] I have e2fsprogs installed, so I don't know why it cant do the fsck

[2022-01-23T01:57:21Z] acheam: i think dilyn's just trying to learn go

[2022-01-23T01:57:57Z] cproc is permissive

[2022-01-23T01:58:15Z] i'm pretty sure clang is permissive

[2022-01-23T14:43:42Z] dilyn: https://tmp.bvnf.space/0001-catgirl-bump-to-2.0a.patch

[2022-01-23T15:20:34Z] Has anyone here used glasnost linux? I want to use it to comple packages on my one pc abd send it over to my not powerful pc to install kiss

[2022-01-23T15:21:26Z] When I try and do a glasnost install in a vm packages fail to install because of some ssl error

[2022-01-23T15:22:35Z] <testuser[m]> Show

[2022-01-23T15:28:18Z] show the error?

[2022-01-23T15:28:59Z] <testuser[m]> Yeah

[2022-01-23T15:29:23Z] curl: (60) SSL certificate problem: unable to get local issuer certificate

[2022-01-23T15:33:35Z] <testuser[m]> Run /etc/ssl/update-cert*.sh

[2022-01-23T15:33:45Z] <testuser[m]> That script will update ur certs

[2022-01-23T15:33:59Z] <testuser[m]> Else u can manually download them and disable tls verification temporarily

[2022-01-23T15:35:00Z] still gives me the same error

[2022-01-23T15:35:23Z] should I update ssl in the chroot or out of the chroot

[2022-01-23T15:38:37Z] Hey jason123onirc, you should do this inside the chroot

[2022-01-23T15:39:02Z] yeah i am doing it in the chroot just making sure

[2022-01-23T15:39:57Z] I did get a kiss linux install before but now I am trying glasnost to send packages to the less powerful pc I have

[2022-01-23T15:42:21Z] You using an arm device?

[2022-01-23T15:42:42Z] x86_64 to x86_64

[2022-01-23T15:43:31Z] but I first need to install glasnost in a vm to compile the packages

[2022-01-23T15:43:39Z] unless there is a different way to do it

[2022-01-23T15:44:48Z] Shouldn't need to use a vm, would be slow to compile packages.

[2022-01-23T15:45:38Z] You can just extract the x86_64 tarball on the build machine and on the client

[2022-01-23T15:46:29Z] so I don't need to have glasnost installed to build packages?

[2022-01-23T15:48:12Z] Both could be chroots, should be fine

[2022-01-23T15:50:39Z] https://bugzilla.mozilla.org/show_bug.cgi?id=1745560

[2022-01-23T15:54:41Z] Do I just mount the chroot and then use kiss-chroot to go into it?

[2022-01-23T16:02:58Z] oh I got it now

[2022-01-23T16:10:18Z] same error when I chroot from my host pc

[2022-01-23T16:17:25Z] OK, will look into it. For now as suggested you can temporarily disable tls verification

[2022-01-23T16:17:45Z] In /etc/ssl/update-certdata.sh, add a "-k" argument to curl

[2022-01-23T16:19:10Z] hi hi hi

[2022-01-23T16:20:09Z] Yeah, I had the same problem, i think I just copied all the ssl certificates over from my host machine, which is definately not the correct way to do things.

[2022-01-23T16:20:31Z] It's a problem because you need the certificates in order to update the certificates, I think...

[2022-01-23T16:21:16Z] I really need to go in and do a write up, but it's one of about five different things I need to do.

[2022-01-23T16:22:31Z] also have a problem with netsurf-vi updating, but I'm not even sure which repo it's from... I should probably get around to that, I'm just trying to polish up a pull rekwest with someone else first.

[2022-01-23T16:22:59Z] oh, -k, okay.

[2022-01-23T16:27:05Z] yeah a guide on how to use glasnost and compile stuff from it would be cool

[2022-01-23T16:46:41Z] There is some basic info on the repo page in github. Let me know if you have more specific questions, I can add more

[2022-01-23T16:46:50Z] bibliocar: what's up with netsurf-vi?

[2022-01-23T17:40:01Z] jedavies: I downloaded the tarball inside the install and extracted it and when I run KISS_ROOT=glasnost-linux kiss b neofetch it gives me an error about the package not being found

[2022-01-23T17:40:39Z] or any package really

[2022-01-23T17:43:07Z] nevermind just any package fails to build

[2022-01-23T17:43:30Z] and when i run a kiss u it tells me ERROR '*' not found

[2022-01-23T17:51:47Z] Did you set KISS_PATH ?

[2022-01-23T17:53:46Z] yes I did set kiss path

[2022-01-23T17:54:05Z] do I need to set kiss path in the tarball?

[2022-01-23T18:07:31Z] You need to set KISS_PATH to build packages, or cd to the package directory and run "kiss b" there. Also neofetch is in the community repo, but pfetch is available in the main repo

[2022-01-23T18:12:26Z] do I need to set kiss_root or just run kiss from glassnost? Since I am using x86_64 to x86_64 I might be able to just build right from the chroot

[2022-01-23T18:14:09Z] oh yeah when I build a package it gives me an error about /dev/tty not being found

[2022-01-23T18:36:07Z] I think you don't need a KISS_ROOT in your case. Built packages should be in ~/.cache/kiss/bin/local

[2022-01-23T18:42:44Z] ok that makes sense

[2022-01-23T18:43:02Z] but it gives me an error about /dev/tty not being found

[2022-01-23T18:54:13Z] Can you post the full error?

[2022-01-23T19:07:12Z] oh I figured it out

[2022-01-23T19:07:16Z] chroot is annoying

[2022-01-23T19:07:32Z] now its saying unknown user 1000

[2022-01-23T19:07:55Z] a guide on how to setup a chroot to compile packages would be nice

[2022-01-23T19:11:37Z] the full error is

[2022-01-23T19:12:13Z] Using /usr/bin/su (to become 1000) su: unknown user 1000

[2022-01-23T19:14:54Z] <bibliocar_> My solution was just to chown everything to root. I'm pretty sure what I do would make most people cringe... I made one person even go "nooooo"

[2022-01-23T19:16:08Z] <bibliocar_> ah, you are an unknown user

[2022-01-23T19:17:16Z] <bibliocar_> I'm the newb

[2022-01-23T19:17:37Z] oh yeah that did work

[2022-01-23T19:17:42Z] i mean

[2022-01-23T19:17:49Z] as long as it works and builds the package

[2022-01-23T19:18:33Z] <bibliocar_> I intend to go back and do everything correctly... eventually. I'm just a bit overloaded at the moment.

[2022-01-23T19:19:08Z] There needs to be a guide on how to setup a chroot to build packages

[2022-01-23T19:21:37Z] right now the github page just lists generic steps and leaves the user to doing most of the work on setting up the envirement to build the packages

[2022-01-23T19:22:29Z] even though its not as easy as chrooting into the tarball

[2022-01-23T19:25:52Z] <bibliocar_> Well, maybe it's not supposed to be easy, and little problems will continue to crop up. I don't know, not really my place to say. I'm just new here.

[2022-01-23T19:26:33Z] <bibliocar_> Personally, I agree with you.

[2022-01-23T19:28:57Z] <bibliocar_> I need to poke at the kernel config this guy was having trouble with, but it takes forever for my computer to build anything.

[2022-01-23T20:49:19Z] Is there a way to now compile the kernel on the build machine? Looks like there is only a kernel build for the pinephone. I want to make glasnost on the target machine just like a regular kiss install and not just be in a chroot

[2022-01-23T22:03:04Z] testuser[m]: I agree with noocsharp on that front; 'crazy' is also a loaded term. mental health is important :v

[2022-01-23T22:03:13Z] acheam: llvm is permissive enough xD

[2022-01-23T22:04:50Z] jason123onirc: you should extract chroot tarballs as root so that the permissions are proper; if you extract as your user every file will have your user as the owner/group, which is not what you want (your user doesn't exist in that chroot, and this is the problem you're encountering)

[2022-01-23T22:05:26Z] I always keep a copy of kiss-chroot around so that I can quickly have a chroot setup in the proper ways (for instance, you perhaps didn't bind mount /dev which is why /dev/tty could not be found...)

[2022-01-23T22:14:36Z] kiss-chroot does not work in this instance because the tarball is not mounted

[2022-01-23T22:17:05Z] though I got it all working now I just need to figure out how to get it installed on the other pc now

[2022-01-23T22:38:25Z] is sshfs or equivalent in community?

[2022-01-23T23:03:24Z] phinxy: rclone