2006-04-14 Gadgets

Hooked Claudia’s brother HL-5030 printer, plugged it into my iBook, and tried to print. No drivers! Googled for brother+drivers, downloaded the drivers, installed them, and printed. Worked! Noticed that those were CUPS drivers.

Booted up SlackWare box, tried to figure out how CUPS actually works. Made /etc/rc.d/rc.cups executable, ran it with the start parameter, looked at http://localhost:631/, didn’t get it, downloaded the drivers for Linux – .deb or .rpm – figured out how to extract the stuff from the .deb file, copied it into my directory tree using stow, installed it by looking at the postinst script. Looked at http://localhost:631/ again, found the new printer!

=> SlackWare | http://localhost:631/ | http://localhost:631/

Tried to print the test page. Nothing.

Tried to print a PDF file. Nothing.

Everything seems to work except for the printing.

They’re all listed on http://localhost:631/jobs?which_jobs=completed – but the printer didn’t print them.

=> http://localhost:631/jobs?which_jobs=completed

I think I’m going to cry a little, now.

~ alex $ lpq
HL5030 is ready
no entries
~ alex $ lpstat -p -d
printer HL5030 is idle.  enabled since Jan 01 00:00
system default destination: HL5030

When I look at http://localhost:631/printers/HL5030, I see that the device URI is usb:/dev/usb/lp0. I tried modifying the printer and choosing different USB devices + printing test pages, but that just resultet in error messages. When I use lp0, there are no error messages on the printer page. Thus, the CUPS system seems to know about the printer.

=> http://localhost:631/printers/HL5030

It’s just the jobs that vanish into nirvana.

The log files in /var/log/cups don’t show anything unusual.

The spool seems to know about all the print jobs:

root@confusibombus:/home/alex# ls /var/spool/cups/
c00001  c00004  c00007  c00010  c00013  c00016  c00019  tmp
c00002  c00005  c00008  c00011  c00014  c00017  c00020
c00003  c00006  c00009  c00012  c00015  c00018  c00021

The spool itself is considered empty:

root@confusibombus:/home/alex# lpstat -o

Grrrr.

~ alex $ lp bbdb.ps
request id is HL5030-24 (1 file(s))

No effect.

USB stuff seems to be ok, too. Notice the printer, here:

~ alex $ tail /proc/bus/usb/devices
T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=02 Dev#=  4 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=04f9 ProdID=0015 Rev= 1.00
S:  Manufacturer=Brother
S:  Product=HL-5030
S:  SerialNumber=D3J309331
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:  If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Permissions?

~ alex $ ls -l /dev/usb/lp0
crw-rw----  1 root lp 180, 0 2001-03-25 23:04 /dev/usb/lp0
~ alex $ groups
users bin disk floppy

Maybe that’s it?

root@confusibombus:/home/alex# usermod -G users,bin,disk,floppy,lp alex

Logging out and logging back in had no effect. 🙁

Maybe the cups daemon has a different group?

~ alex $ ps -o pid,group,cmd xa|grep cup
 2098 root     /usr/sbin/cupsd

I don’t think the cups daemon should have a problem writing anywhere. ;)

Linux version 2.4.31 (root@tree) (gcc version 3.3.5) #6 Sun Jun 5 19:04:47 PDT 2005

BIOS-provided physical RAM map:

BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)

BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)

BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

BIOS-e820: 0000000000100000 - 000000003dffc000 (usable)

BIOS-e820: 000000003dffc000 - 000000003dfff000 (ACPI data)

BIOS-e820: 000000003dfff000 - 000000003e000000 (ACPI NVS)

BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)

Warning only 896MB will be used.

Use a HIGHMEM enabled kernel.

896MB LOWMEM available.

On node 0 totalpages: 229376

zone(0): 4096 pages.

zone(1): 225280 pages.

zone(2): 0 pages.

Kernel command line: auto BOOT_IMAGE=Linux ro root=342

Initializing CPU#0

Detected 3000.923 MHz processor.

Console: colour VGA+ 80x25

Calibrating delay loop... 5989.99 BogoMIPS

Memory: 904376k/917504k available (1832k kernel code, 12740k reserved, 607k data, 120k init, 0k highmem)

Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)

Inode cache hash table entries: 65536 (order: 7, 524288 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)

Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)

CPU: Trace cache: 12K uops, L1 D cache: 16K

CPU: L2 cache: 1024K

CPU: After generic, caps: bfebfbff 00000000 00000000 00000000

CPU: Common caps: bfebfbff 00000000 00000000 00000000

CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04

Enabling fast FPU save and restore... done.

Enabling unmasked SIMD FPU exception support... done.

Checking 'hlt' instruction... OK.

POSIX conformance testing by UNIFIX

mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)

mtrr: detected mtrr type: Intel

PCI: PCI BIOS revision 2.10 entry at 0xf10c0, last bus=1

PCI: Using configuration type 1

PCI: Probing PCI hardware

PCI: Probing PCI hardware (bus 00)

PCI: Using IRQ router default [1039/0963] at 00:02.0

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

VFS: Disk quotas vdquot_6.5.1

Journalled Block Device driver loaded

pty: 512 Unix98 ptys configured

Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled

ttyS00 at 0x03f8 (irq = 4) is a 16550A

Real Time Clock Driver v1.10f

Floppy drive(s): fd0 is 1.44M

FDC 0 is a post-1991 82077

RAMDISK driver initialized: 16 RAM disks of 7777K size 1024 blocksize

loop: loaded (max 8 devices)

Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4

ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx

SIS5513: IDE controller at PCI slot 00:02.5

SIS5513: chipset revision 0

SIS5513: not 100% native mode: will probe irqs later

SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller

ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:DMA

ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:DMA

hda: ST313021A, ATA DISK drive

hdb: Maxtor 6Y120L0, ATA DISK drive

blk: queue c03af460, I/O limit 4095Mb (mask 0xffffffff)

blk: queue c03af59c, I/O limit 4095Mb (mask 0xffffffff)

hdc: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive

hdd: Maxtor 6Y120P0, ATA DISK drive

blk: queue c03af9f0, I/O limit 4095Mb (mask 0xffffffff)

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

ide1 at 0x170-0x177,0x376 on irq 15

hda: attached ide-disk driver.

hda: host protected area => 1

hda: 25434228 sectors (13022 MB) w/512KiB Cache, CHS=1583/255/63, UDMA(66)

hdb: attached ide-disk driver.

hdb: host protected area => 1

hdb: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63, UDMA(133)

hdd: attached ide-disk driver.

hdd: host protected area => 1

hdd: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=238216/16/63, UDMA(133)

hdc: attached ide-cdrom driver.

hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)

Uniform CD-ROM driver Revision: 3.12

Partition check:

hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 >

hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 >

hdd: hdd1 hdd2 hdd3 hdd4 < hdd5 hdd6 hdd7 >

SCSI subsystem driver Revision: 1.00

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2

md: linear personality registered as nr 1

md: raid0 personality registered as nr 2

md: raid1 personality registered as nr 3

md: raid5 personality registered as nr 4

raid5: measuring checksumming speed

8regs : 3282.000 MB/sec

32regs : 2204.400 MB/sec

pIII_sse : 5196.000 MB/sec

pII_mmx : 3266.000 MB/sec

p5_mmx : 3269.600 MB/sec

raid5: using function: pIII_sse (5196.000 MB/sec)

md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27

md: Autodetecting RAID arrays.

md: autorun ...

md: ... autorun DONE.

LVM version 1.0.8(17/11/2003)

Initializing Cryptographic API

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 8192 buckets, 64Kbytes

TCP: Hash tables configured (established 262144 bind 65536)

Linux IP multicast router 0.06 plus PIM-SM

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

kjournald starting. Commit interval 5 seconds

EXT3-fs: mounted filesystem with ordered data mode.

VFS: Mounted root (ext3 filesystem) readonly.

Freeing unused kernel memory: 120k freed

Adding Swap: 136544k swap-space (priority -1)

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,66), internal journal

Linux agpgart interface v0.99 (c) Jeff Hartmann

agpgart: Maximum main memory to use for agp memory: 816M

agpgart: Unsupported SiS chipset (device id: 0661), you might want to try agp_try_unsupported=1.

agpgart: no supported devices found.

scsi0 : SCSI host adapter emulation for IDE ATAPI devices

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,6), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,67), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,70), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,65), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,66), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,67), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,69), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,70), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

kjournald starting. Commit interval 5 seconds

EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,71), internal journal

EXT3-fs: mounted filesystem with ordered data mode.

ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)

wlan: 0.8.4.5 (EXPERIMENTAL)

ath_rate_onoe: 1.0

ath_pci: 0.9.4.12 (EXPERIMENTAL)

ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps

ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps

ath0: mac 5.6 phy 4.1 radio 1.7

ath0: 802.11 address: 00:09:5b:e7:15:2c

ath0: Use hw queue 0 for WME_AC_BE traffic

ath0: Use hw queue 1 for WME_AC_BK traffic

ath0: Use hw queue 2 for WME_AC_VI traffic

ath0: Use hw queue 3 for WME_AC_VO traffic

ath0: Atheros 5212: mem=0xe4000000, irq=10

ohci1394: $Rev: 1045 $ Ben Collins bcollins@debian.org

ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[11] MMIO=[e5000000-e50007ff] Max Packet=[2048]

sis900.c: v1.08.07 11/02/2003

eth0: VIA 6103 PHY transceiver found at address 1.

eth0: Using transceiver found at address 1 as default

eth0: SiS 900 PCI Fast Ethernet at 0x8800, IRQ 3, 00:11:2f:4a:c1:7f.

usb.c: registered new driver usbdevfs

usb.c: registered new driver hub

ehci_hcd 00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller

ehci_hcd 00:03.3: irq 9, pci mem f88ac000

usb.c: new USB bus registered, assigned bus number 1

PCI: cache line size of 128 is not supported by device 00:03.3

ehci_hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4

ieee1394: Host added: ID:BUS[0-00:1023] GUID[0001b7000000b64e]

hub.c: USB hub found

hub.c: 6 ports detected

usb-ohci.c: USB OHCI at membase 0xf88b4000, IRQ 5

usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] USB 1.0 Controller

usb.c: new USB bus registered, assigned bus number 2

hub.c: USB hub found

hub.c: 3 ports detected

usb-ohci.c: USB OHCI at membase 0xf88b6000, IRQ 9

usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)

usb.c: new USB bus registered, assigned bus number 3

hub.c: USB hub found

hub.c: 3 ports detected

intel8x0_measure_ac97_clock: measured 44369 usecs

intel8x0: clocking to 48000

hub.c: new USB device 00:03.3-3, assigned address 2

usb.c: USB device 2 (vend/prod 0x59f/0x351) is not claimed by any active driver.

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

shpchp: shpc_init : shpc_cap_offset == 0

shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

pciehp: PCI Express Hot Plug Controller Driver version: 0.5

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

shpchp: shpc_init : shpc_cap_offset == 0

shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

pciehp: PCI Express Hot Plug Controller Driver version: 0.5

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

shpchp: shpc_init : shpc_cap_offset == 0

shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

pciehp: PCI Express Hot Plug Controller Driver version: 0.5

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

shpchp: shpc_init : shpc_cap_offset == 0

shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

pciehp: PCI Express Hot Plug Controller Driver version: 0.5

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

shpchp: shpc_init : shpc_cap_offset == 0

shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

pciehp: PCI Express Hot Plug Controller Driver version: 0.5

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

shpchp: shpc_init : shpc_cap_offset == 0

shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

pciehp: PCI Express Hot Plug Controller Driver version: 0.5

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

shpchp: shpc_init : shpc_cap_offset == 0

shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

pciehp: PCI Express Hot Plug Controller Driver version: 0.5

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

shpchp: shpc_init : shpc_cap_offset == 0

shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

pciehp: PCI Express Hot Plug Controller Driver version: 0.5

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

shpchp: shpc_init : shpc_cap_offset == 0

shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

pciehp: PCI Express Hot Plug Controller Driver version: 0.5

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

shpchp: shpc_init : shpc_cap_offset == 0

shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

pciehp: PCI Express Hot Plug Controller Driver version: 0.5

Initializing USB Mass Storage driver...

usb.c: registered new driver usb-storage

scsi1 : SCSI emulation for USB Mass Storage devices

Vendor: Maxtor Model: 7Y250P0 Rev: YAR4

Type: Direct-Access ANSI SCSI revision: 02

Attached scsi disk sda at scsi1, channel 0, id 0, lun 0

SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)

sda: sda1

WARNING: USB Mass Storage data integrity not assured

USB Mass Storage device found at 2

USB Mass Storage support registered.

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

shpchp: shpc_init : shpc_cap_offset == 0

shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

pciehp: PCI Express Hot Plug Controller Driver version: 0.5

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

shpchp: shpc_init : shpc_cap_offset == 0

shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

pci_hotplug: PCI Hot Plug PCI Core version: 0.5

pciehp: PCI Express Hot Plug Controller Driver version: 0.5

uhci.c: USB Universal Host Controller Interface driver v1.1

usb-uhci.c: $Revision: 1.275 $ time 18:53:41 Jun 5 2005

usb-uhci.c: High bandwidth mode enabled

usb-uhci.c: v1.275:USB Universal Host Controller Interface driver

parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]

parport0: irq 7 detected

lp0: using parport0 (polling).

hub.c: new USB device 00:03.3-4, assigned address 3

usb.c: USB device 3 (vend/prod 0x4f9/0x15) is not claimed by any active driver.

usb.c: registered new driver usblp

printer.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0015

printer.c: v0.13: USB Printer Device Class driver

usb.c: USB disconnect on device 00:03.3-4 address 3

printer.c: usblp0: removed

hub.c: new USB device 00:03.3-4, assigned address 4

printer.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0015

Looks as if some USB lp0 should be the printer...

Next, I edited `/etc/cups/cups.conf` and changed LogLevel from `info` to `debug`. Then I restarted using `/etc/rc.d/rc.cups restart`.

And here’s what `/var/log/cups/error_log` has to say:

I [15/Apr/2006:18:24:54 +0200] Listening to 0:631

D [15/Apr/2006:18:24:54 +0200] AddLocation: added location '/'

D [15/Apr/2006:18:24:54 +0200] DenyIP: / deny 00000000/00000000

D [15/Apr/2006:18:24:54 +0200] AllowIP: / allow 7f000001/ffffffff

D [15/Apr/2006:18:24:54 +0200] AddLocation: added location '/admin'

D [15/Apr/2006:18:24:54 +0200] DenyIP: /admin deny 00000000/00000000

D [15/Apr/2006:18:24:54 +0200] AllowIP: /admin allow 7f000001/ffffffff

I [15/Apr/2006:18:24:54 +0200] Loaded configuration file "/etc/cups/cupsd.conf"

I [15/Apr/2006:18:24:54 +0200] Configured for up to 100 clients.

I [15/Apr/2006:18:24:54 +0200] Allowing up to 100 client connections per host.

I [15/Apr/2006:18:24:54 +0200] Full reload is required.

D [15/Apr/2006:18:24:54 +0200] LoadAllPrinters: Loading printer HL5030...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "ipp"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "lpd"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "usb://Brother/HL-5030%20series"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "usb:/dev/usb/lp1"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "usb:/dev/usb/lp2"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "usb:/dev/usb/lp3"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "usb:/dev/usb/lp4"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "usb:/dev/usb/lp5"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "usb:/dev/usb/lp6"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "usb:/dev/usb/lp7"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "usb:/dev/usb/lp8"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "usb:/dev/usb/lp9"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "usb:/dev/usb/lp10"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "usb:/dev/usb/lp11"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "usb:/dev/usb/lp12"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "usb:/dev/usb/lp13"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "usb:/dev/usb/lp14"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "usb:/dev/usb/lp15"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "scsi"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "parallel:/dev/lp0"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS0?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS1?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS2?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS3?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS4?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS5?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS6?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS7?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS8?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS9?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS10?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS11?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS12?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS13?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS14?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS15?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS16?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS17?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS18?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS19?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS20?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS21?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS22?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS23?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS24?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS25?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS26?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS27?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS28?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS29?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS30?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "serial:/dev/ttyS31?baud=115200"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "socket"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "smb"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "http"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "epson:/dev/lp0"...

D [15/Apr/2006:18:24:54 +0200] LoadDevices: Added device "canon:/dev/lp0"...

I [15/Apr/2006:18:24:54 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 562 PPDs...

D [15/Apr/2006:18:24:54 +0200] LoadPPDs: Updating ppd "brhl5030_cups.ppd"...

I [15/Apr/2006:18:24:54 +0200] LoadPPDs: Wrote "/etc/cups/ppds.dat", 562 PPDs...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Scanning /var/spool/cups...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 1...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 2...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 3...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 4...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 5...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 6...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 7...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 8...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 9...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 10...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 11...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 12...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 14...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 13...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 15...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 16...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 17...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 18...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 19...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 20...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 21...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 22...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 23...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 24...

D [15/Apr/2006:18:24:54 +0200] LoadAllJobs: Loading attributes for job 25...

I [15/Apr/2006:18:24:54 +0200] Full reload complete.

D [15/Apr/2006:18:24:54 +0200] StartListening: NumListeners=1

D [15/Apr/2006:18:24:54 +0200] StartListening: address=00000000 port=631

D [15/Apr/2006:18:24:54 +0200] ResumeListening: setting input bits...

Proxy Information
Original URL
gemini://alexschroeder.ch/2006-04-14_Gadgets
Status Code
Success (20)
Meta
text/gemini
Capsule Response Time
199.00676 milliseconds
Gemini-to-HTML Time
6.124319 milliseconds

This content has been proxied by September (3851b).